2021年9月24日星期五

Laser Diode 980nm Face Veins Remove Machine

 Laser Diode 980nm Face Veins Remove Machine Parameter:

Part No. BLS1214
Energy Source 980nm Diode Laser
Work Mode Pulse / Continuous
Frequency 1-5Hz
Pulse Width 15-100ms (5ms per step)
Output Laser Power 30 Watts 15Watts
Tip Diameter 650nm infrared ray
Cooling System Fan cooling system
Focus Size 0.2/ 0.5/2.0/ 3.0mm
Control Panel Touch Button Control Panel
Machine Dimension 30 (W)* 35(L) * 16 (H)CM
Packing Dimension 42 (W)* 44(L) * 22 (H)CM
Working Environment 10 – 28℃ 30~80%RH,500~1060hPa
Power Specification AC220V – 240V/50Hz
N.W 4Kg
G.W 9Kg

980nm diode laser vascular spider vein removal machine principle

980nm laser is the optimum absorption spectrum of porphyrin vascular cells. Vascular cells absorb the high-energy laser of 980nm wavelength, solidification occurs, and finally dissipated. Compared with traditional method, 980nm diode laser can reduce redness, burning of the skin. To reach the target tissue more accurately, the laser energy is delivered by a professional design hand-piece. It enables energy to be focused.

Laser can stimulate the dermal collagen growth while vascular treatment, increase epidermal thickness and density, so that the small blood vessels are no longer exposed, at the same time, the skin’s elasticity and resistance is also significantly enhanced.



980nm advantage:

1. Less side effects: no burning, redness or scar;
2. Less sessions: Only one or two treatments are requied;
3. Portable and smart design is covenient to do treatment;
4. Better results: energy is well focused onto 0.2-0.5mm spot;
5. 1-30W/ 60W adjustable energy to satisfy different requirements;
6. Three modes: CW Pulse Mode, Pulse Mode, and Single for optional;
7. Newest laser technology for vascular removal and spider veins remval;
8. Adjustable spot size: from 0.2 to 2 mm of diameter for operator do treatment;

The micro-dots high-frequency lightning produces a 30MHz ultra high frequency electromagnetic oscillation, with the unique soft silk ( than hair thinner ), at 1/ 1000 second time break the hemoglobin, will release the energy transfer to the surface of the skin following removal of lesions, capillaries, and intravascular hemoglobin break make it into small molecules are absorbed by the skin tissue itself, so as to make it reach the disposable permanent eradication of red blood results, each treatment of red blood streak time should not exceed 15 minutes, precise digital control system, perfect and concise treatment procedures, simple operation is beneficial to quickly grasp. Beauty Device Made in China Best Nose Trimmers For 2019, 980nm Laser Spider Vein Red Blood Vessels Removal Machine

2021年9月14日星期二

Portable 980nm Diode Laser Vascular Therapy Equipment

 

Portable 980nm Diode Laser Vascular Therapy Equipment BLS1214, diode laser 980nm device, Portable red blood vessels spider vein removal 980nm diode laser, professional vascular vein removal/spider veins vascular/capillaries removal 980nm diode laser machine

Portable 980nm Diode Laser Vascular Therapy Equipment Parameter:
Part No. BLS1214
Energy Source 980nm Diode Laser
Work Mode Pulse / Continuous
Frequency 1-5Hz
Pulse Width 15-100ms (5ms per step)
Output Laser Power 30 Watts 15Watts
Tip Diameter 650nm infrared ray
Cooling System Fan cooling system
Focus Size 0.2/ 0.5/2.0/ 3.0mm
Control Panel Touch Button Control Panel
Machine Dimension 30 (W)* 35(L) * 16 (H)CM
Packing Dimension 42 (W)* 44(L) * 22 (H)CM
Working Environment 10 – 28℃ 30~80%RH,500~1060hPa
Power Specification AC220V – 240V/50Hz
N.W 4Kg
G.W 9Kg



Portable spider vein removal machine 980nm laser diode Treatment Theory

The 980nm wavelength has a particular characteristic to be absorbed in a similar way by water and haemoglobin.Because the tissue contain a high percentage of water, it is important that a surgical laser would be absorbed by the water to ablate tissuess properly.The light absorption of same wavelength by haemoglobin is also important for coagulation and successful haemostasis.

Advantages in Veins
In-office procedure performed in less than an hour
No hospital stay
Instant relief from symptoms
No unsightly scaring or large, prominent incisions
Quick recovery with minimal post-procedural pain

2021年9月4日星期六

Diode Laser 980nm Vascular Remove Vein Remove Machine

 

Diode Laser 980nm Vascular Remove Vein Remove Machine, Portable spider vein removal machine, 980nm diode laser vascular removal device, Medical 980 spider vein vascular removal laser/vascular lesions removal diode laser 980nm remove leg veins

Diode Laser 980nm Vascular Remove Vein Remove Machine Parameter

Part No. BLS1230
Energy Source 980nm Diode Laser
Work Mode Pulse / Continuous
Frequency 1-5Hz
Pulse Width 15-100ms (5ms per step)
Output Laser Power 30 Watts 15Watts
Tip Diameter 650nm infrared ray
Cooling System Fan cooling system
Focus Size 0.2/ 0.5/2.0/ 3.0mm
Control Panel Touch Button Control Panel
Machine Dimension 30 (W)* 35(L) * 16 (H)CM
Packing Dimension 42 (W)* 44(L) * 22 (H)CM
Working Environment 10 – 28℃ 30~80%RH,500~1060hPa
Power Specification AC220V – 240V/50Hz

980nm diode laser vascular spider vein removal machine principle
980nm laser is the optimum absorption spectrum of porphyrin vascular cells. Vascular cells absorb the high-energy laser of 980nm wavelength, solidification occurs, and finally dissipated. Compared with traditional method, 980nm diode laser can reduce redness, burning of the skin. To reach the target tissue more accurately, the laser energy is delivered by a professional design hand-piece. It enables energy to be focused.



Laser can stimulate the dermal collagen growth while vascular treatment, increase epidermal thickness and density, so that the small blood vessels are no longer exposed, at the same time, the skin’s elasticity and resistance is also significantly enhanced.

980nm diode laser vascular spider vein removal machine Treatment characteristics